2060 Multi-Wiring Harness Welding
Ultrasonic terminal and wire-harness welding demonstration.
Technical Specifications
- Model
- JHN2056
- Rated capacity
- 5600 W
- Frequency
- 20 kHz
- Input voltage
- 220 V, 50 Hz
- Max. welding area
- wire and terminal welding
- Net weight
- 92 kg
Why this process
- No solder, no flux — the joint stays clean for downstream taping and crimping.
- Low heat input — insulation next to the weld is not scorched.
- Multi-branch bundles are welded in one cycle instead of one branch at a time.
- Digital controller keeps power and time repeatable from part to part.
Typical applications
Automotive and appliance wiring harnesses · multi-branch terminal joints · pre-stripped copper bundles · 50 sqmm class wire terminal welding.
FAQs
How many wires can be welded at once?
The horn is sized for the terminal, so a multi-branch harness is welded as one bundle in a single cycle — the 2060 head handles the 50 sqmm class.
Is the wire pre-stripped before welding?
Yes. Branches are stripped and gathered first; the weld then bonds the bare copper into the terminal without filler metal.
What is the rated duty cycle?
5600 W at 20 kHz with a built-in air cylinder; continuous production runs are limited by the cycle time, not by duty rating.
Full machine details → JHN2056 ultrasonic metal spot welder